*shipping not included *prices in $CAD
|
|
 |
Fuel and Ignition |
| Nismo 555cc injectors are
direct bolt in replacement injectors for the
SR20DET/KA24DE factory fuel rail and harness
plugs. We recommend these injectors if you
are running any GT series turbo on your SR20DET,
or T3/T4 or larger turbo on a KAT running
more than 10 psi boost. We’ve found
that 370cc SR injectors max out duty cycle
around 300 WHP. By switching to larger injectors
you can safely deliver more fuel to your motor
without risk of leaning out or running too
high of duty cycle which overheats and shuts
the injector down. Nismo 555 cc injectors
are perfect for pump gas applications around
300 WHP, and up to 400 WHP on tuned motors
running race gas. Kit includes injector o-rings.
ECU will have to be tuned to calibrate for
these larger injectors (note if you intend
to run more than 400 WHP or large boost numbers,
we recommend upgrading to the 740cc Nismo
injectors) |
 |
Note sold in sets of 4 injectors with O-rings
| Nismo 740cc injectors
are direct bolt in replacement injectors for
the SR20DET/KA24DE factory fuel rail and harness
plugs These large injectors are recommended
if you are running much more boost or airflow
than stock. For 400+ WHP applications or more.
Not necessary if you are running 15 psi or
less on your motor. PDM recommends having
your ECU professionally tuned along with installation
of an adjustable fuel pressure regulator,
fuel pressure gauge, upgraded fuel pump and
setup and tuning with a wide band O2 sensor
system in a controlled environment such as
a load cel dyno to properly tune these injectors.
Kit includes injector o-rings |
 |
|
NISMO Type A Fuel Pressure Regulator
|
 |
Nissan fuel pressure regulators are a
restrictive type regulator that limits
fuel bleed off back to the fuel tank and
builds up fuel pressure in the rail. Nismo
Type A Adjustable fuel pressure regulators
allow you to change the stock fuel pressure
to feed more fuel to the injectors. Stock
SR 370cc SR20DET injectors can be pushed
a bit more by raising the fuel pressure
a few psi from the stock 36psi base pressure.
Not a cure for larger injectors, however
if you want to squeeze a few more pounds
of boost out of the stock injectors on
a budget, this regulator will allow this.
OEM replacement complete with o-rings,
this regulator still retains the factory
1:1 boost dependent ratio.
In addition, over time the stock regulator’s
diaphragm can gum up and stick creating
fuel delivery problems such as hard cold/hot
starts and inconstant fuel delivery potentially
leading to a lean melt-down condition.
We recommend proper wide band tuning in
a controlled environment such as a load
cel dyno to properly tune your engine.
* Will also fit RB25DET.
* Special
cross-border duty & shipping charges
applied to Canadian orders. Email
us for more details
|
 |
Walbro Fuel Pumps |
| These
Walbro high output in-tank electric fuel
pumps exhibit flow ratings of 255 liters
of fuel per hour (lph). These particular
pumps flow significantly more fuel at
higher pressure. For instance, at 80 PSI
the standard 255 lph pump will flow around
132 liters (35 gallons) per hour. At that
same 80 PSI the equivalent HP (high pressure)
fuel pump will flow over 210 liters (50
gallons) per hour.
Walbro in-tank electric
fuel pumps utilize a proven gerotor design.
The outside dimensions, however, are compact
enough to fit existing hanger assemblies,
without modification.
Perfect for your SR20DET
or KA Turbo upgrade. |
 |
These are complete fuel pump kits and include
all drop parts, accessories and installation
instructions. Also included is an inlet filter
that meets or exceeds original equipment specifications
and provides improved filtration and durability.
Note: The pumps are CHASSIS
dependent, NOT Engine dependent.
OEM Nissan Fuel Filters
Changing your plugs ? Doing your yearly tune
up ? Good time to change the fuel filter
also, to ensure your Nissan is running in top
condition. Dirty fuel filters will impeded
fuel flow to your engine, and possibly cause
lean surging on turbocharged or high compression
motors. Don’t take chances on relying
on service station filters to trap dirt and
contaminents. PDM recommends the Nissan
300ZX fuel filter for your 240SX application,
as a direct bolt-in for your performance needs.
|
|
|
NGK Iridium IX Plugs
 Iridium
is a silver-white precious metal that is among
the densest materials on earth. Since
it’s so dense, it will outlast Platinum
and Copper plugs. Plus this ultra-
hard material also enables the plug center electrode
to be 25% narrower than Platinum, and 75% narrower
than conventional nickel electrodes, which requires
less voltage to spark, and delivers increased
burn efficiency, sparks at leaner
air/fuel mixtures, and produces better
gas mileage and higher horsepower. Iridium
plugs are a must for turbocharged and high compression
or high revving NA motors.
NGK SPARK PLUGS
By far, the cheapest, and most cost-effective
item you can change on your engine, is the spark
plugs. NGK spark plugs are proven performers,
with increased performance, idle, and fuel consumption,
at very low costs. PDM carries V Power
plugs for their solid copper core (best conductivity,
and spark in NGK’s lineup). We recommend
you change your 240SX plugs at least once a
year, for top notch performance and reliability.
*Spark Plug Info
Guide
**Read
Your Plug
|
NGK 7mm Silicone Wires
With so many requests to bring them back, PDM
is again selling the very popular NGK wires
for the 240SX. With their familiar bright blue
silicone covering, NGK wires are known worldwide
for their excellent noise suppression, high
quality, and wide product range. NGK resistor
spark plug cables are made with variable pitch
wire coils, with a Kerlar core and Ferrite magnetic
layer wrapped with tight winding. |
|
|
Aurora 8.5mm Super Mag Plus Ignition Wires
PDM is pleased
to offer NEW Aurora 8.5mm silicone spark
plug wires for both the SOHC and DOHC
KA24DE. With more than 5 times better
current flow than carbon core wires, these
full stainless steel conducted, high temperature
silicone booted wires will offer maximum
performance for your turbocharged or NOS'd
ride. Custom made for PDM in 8.5mm RED
silicone, Aurora wires are the ultimate
wire set for your car. (note - we can
get many other vehicle wires custom made
up to order)
(please indicate colour required,
if no color is specified we will ship
whichever color we have in stock) |
|
More Info / Ordering |
|
|
|
