|
 Silicone
connectors
3" silicone rubber connectors,
and 3" to 2.5" reducers to adapt to
your MAS. Building your own cold air intake for
your naturally aspirated car ? PDM offers silicone
rubber adapters to allow you to build your own
systems. These are inexpensive couplers and reducers
to allow you to install air filters and intake
extensions for your intake system. (note, these
are not designed to withstand heat or boost, so
they are not for turbo hot pipes or intercooler
pipes)
4 ply Silicone Super Turbo Hose
Super heavy duty, heater, coolant and turbo intercooler
hose spec. This hose exceeds SAE 20R1 specs, and
is oil and antifreeze resistant, and able to take
huge boost amounts.
Tube: smooth blue inner, oil and temperature
resistant.
Cover: Blue, oil, heat and weather resistant
silicone rubber with wrapped finish.
Temperature range: -67 F to 347 F
Perfect hose for serious turbocharged applications.
Sold in 1 foot pieces. (contact PDM if you need
longer pieces)
TRICO
STAINLESS HOSE CLAMPS
High quality stainless hose clamps made by Trico
to fit over the silicone connectors.
KODIAK HEAVY DUTY
SPRING LOADED BOLT CLAMPS
 |
Super high
quality T-bolt clamps are designed specifically
for use with silicone coolant and turbocharger
hoses that see extreme boost duty. Turbocharged
applications require silicone hose for it's
heat resistance and ability to take extreme
pressure, however silicone tends to soften
and extrude easily when hot. Conventional
hose clamps will seal adequately when cold,
or work great for cold air intakes, or the
intake side of a turbo system, however they
may allow leakage or hose blow off when hot.
G39 clamps feature a spring that maintains
a constant tension regardless of temperature.
|
These clamps feature a stainless
band and plated steel fastener and spring. A definite
must for those running boosted vehicles.
Universal Aluminum
Vacuum Line Fittings:
Are you building your own custom intake system and
discovered you have to fabricate and weld a vacuum
line fitting into the intake tube? Pretty hard to
do with steel, especially stainless (tough to machine
and weld), and thin-walled aluminum is very hard
to tig without melting.
PDM can help you solve this problem with our new
Universal Aluminum Vacuum Line Fittings. Simply
check the size of the vacuum line or vent line for
your specific application, drill the proper sized
hole in the tube, and insert the rubber grommet
and aluminum fitting and your problem is solved.
Fittings are sold with outside dimensions listed
(i.d. of hose)
T304 Stainless Steel Oxygen Sensor Bungs
For those adding Wideband O2 sensors to your exhaust
system, PDM has T304 stainless bungs ready to weld
into your downpipe or exhaust system. 1” o.d.
with .5” T304 stainless threaded bung to fit
most popular O2 sensors.
|
SILICONE HUMP HOSE
